Diy plug in hanging light8/24/2023 You will need an UNO-threaded socket to work with UNO-threaded shade fitters, this is a classic style of threading found on sockets all the way back in vintage eras up to today. The adjustment screws on the fitter allow for about 1/2 inch of adjustment, so for example: a 3.25" fitter will fit a shade with a max neck diameter of 3.25", but can go as low as 2.75" neck diameter. The fitter itself is usually larger than this dimension, because a 2.25" fitter means it is meant to fit a 2.25" shade neck, NOT that the fitter itself is sized at 2.25" (for example, the fitters outer diameter may measure 2.50"). If you are retrofitting a vintage shade, or putting a new shade on a vintage fitter, the size fitter you need is determined by the max diameter of the shade neck. In comparison, our 8" globe uses a 4" fitter. 2.25" is the most common (our porcelain shades for example, and most small sized glass shades). You'll want the shade fitter to match the size neck your shade has, we sell 3 sizes: 2.25 inch, 3.25 inch, and 4 inch. We will be dealing with "necked" shades, those are the type that have a portion at the top of the shade that protrudes, allowing it to sit inside a shade fitter with thumb-screw tighteners. Your shade will determine the style of your pendant, and also the size fitter you'll need. Here we'll identify the parts needed to make a pendant light, what goes together and what doesn't, and provide a pick-list with links to make shopping for your parts easy! Designing and building your own pendant lighting can seem overwhelming, but break down the handful of parts that go into it and you'll realize it's a pretty straightforward process.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |